Chemical Recycling Plastic Waste 25-09-2021 - Arhive

This content has been archived. It may no longer be relevant

Chemical Recycling Plastic Waste

-Talon International Launches 100% Sustainable Ghost Net Products

The only company producing a full range of trim items produced from 100% Ghost Net Plastic material

A considerable advancement toward reducing the overabundance of plastic waste in our oceans, benefiting valuable partners and consumers alongside improving our indispensable home: Earth.

After years of meaningful development, Talon International is proud to announce the launch of its innovative Ghost Net Products. The company successfully developed a solution to improving marine habitats by collecting and recycling the surplus of plastic waste that has consumed our beloved oceans.

Plastic waste has finally reached the top of society’s agenda. Only nine percent of the plastic produced since the beginning of the material’s revolutionary debut has been recycled. Unfortunately, much of the remainder invade our waters—4.9 billion tons consuming the habitats of vital marine wildlife. If the trend continues, our oceans will contain more plastic than fish in less than thirty years.

Talon has taken to collecting abandoned ghost nets, a substantial portion of our planet’s plastic waste, and developing them into an assortment of practical fashion items, including zippers, buckles, cord adjusters, buttons, and more. The company’s process is simple: search, collect, clean, regenerate, and develop the recycled resin into innovative products that will change the world, one ghost net at a time.

Talon International has been awarded the Global Recycled Standard by the INFL Laboratory and Institute, certifying that its Ghost Net Products and manufacturing practices conform with international voluntary standards. The company currently coordinates and operates the recycling of ghost nets found amongst China’s shores. Talon is honored to be the first audited and certified fishing net recycling system in China.

Talon International Launches 100% Sustainable Ghost Net Products

-In Parma (Italy) the Tomra Test center for flakes

The new facility that operates worldwide in the application development of solutions for the selection of polyolefin, PVC and PET flakes was inaugurated yesterday.

Tomra inauguration Parma

In Parma, at the Italian headquarters of the Norwegian group Tomra, a new Test Center was recently created for the selection of flakes – flake material obtained from the granulation of plastic waste after the washing phases, before extrusion in granules -, where new applications and solutions for the automatic selection of polyolefins, PVC, PET and HIPS will be developed together with customers from all over the world.

The inauguration of the Test Center was held yesterday during an international event in the presence of a hundred operators in the sector and the specialized press under the banner of “Testing is to believe”. Chemical Recycling Plastic Waste

Fabrizio Radice, VP and Head of Global Sales and Marketing of Tomra Recycling, explained the reasons that led the company to invest in the new structure: “We detect a growing demand, from customers, for tests for the selection of flakes, along with a strong market demand for high-quality recycled plastics. Therefore it is necessary to identify, develop and optimize the technologies and solutions necessary to achieve this goal. This is exactly what we will do in the new center, in close collaboration with our customers and partners “.

In Parma (Italy) the Tomra Test center for flakes

-Evian Debuts PET Bottle Made with 100% Recycled Plastic

Dubbed evian Loop and developed in partnership with Loop Industries, the bottles will be rolled out at commercial scale in South Korea in 2022.

French bottled water company Evian appropriately chose Recycle Week, which runs from Sept. 20 to 26 this year, to move farther along in its journey toward achieving circularity by 2025. In partnership with Loop Industries, evian has developed a prototype bottle that is made entirely of recycled PET. Dubbed evian Loop, the bottles will be rolled out at commercial scale in South Korea in 2022. They will be introduced in other markets at a future date, said evian in the news release.

The evian Loop bottle is made from plastic waste with little to no value that is broken down into its constituent monomers, which are purified and repolymerized into Loop PET plastic. The technology developed by Loop Industries reportedly can endlessly recycle all manner of PET plastic waste, from gym bags to flip flops as well as ocean, colored, and opaque plastics.  Chemical Recycling Plastic Waste

Chemical Recycling Plastic Waste

-Plastic waste recycling: Cornell University research creates in-depth framework for chemical recycling of plastic

The research was published in the journal ACS Sustainable Chemistry and Engineering.

Plastic waste: Chemical recycling is a process that allows waste products to be changed back into natural resources by physical breakdown of plastic into smaller molecules from which it was originally produced. Chemical Recycling Plastic Waste

Now, New York-based Cornell University’s College of Engineering has carried out new research to ease this process. The research was published in the journal ACS Sustainable Chemistry and Engineering, in which the authors detailed mathematical models and methodologies that take into account aspects like equipment for chemical recycling, the process, environmental effects as well as market for the end products, based on which they recommend different strategies and technologies that can be adopted for chemical recycling of plastic waste.

According to the university, this marks the first comprehensive analysis to quantify the environmental impacts of the plastic waste chemical recycling life cycle, including impacts like human toxicity and climate change. Since the 1950s, billions of tons of plastic has been produced but studies have found that a whopping 91% of it has not been recycled. This not only poses environmental issues, but is also a waste of economic opportunity that comes from recycling and reusing plastic.

Chemical Recycling Plastic Waste

-Coloreel develops 100% recycled polyester thread

Coloreels’ new polyester thread is created from 100% recycled post-consumer PET bottles.  Chemical Recycling Plastic Waste

Swedish textile innovation brand Coloreel has introduced a recycled polyester thread used with a technology enabling high-quality colouring of textile thread on demand.

The sustainable move by Coloreel was made in collaboration with thread manufacturing giant Madeira, as it looks to reduce its impact even further.

In line with Coloreel’s mission to provide more sustainable and creative embroidery methods, Coloreel will shift over to offer 100% recycled polyester thread to be used with the instant thread colouring technology for embroideries. This will provide customers the ability to create more sustainable embroideries with thousands of colours, CMYK, RGB/HEX and PMS compatible.

The polyester is created from 100% recycled post-consumer PET bottles and has passed through all industry standard quality testing and provides the same fastness properties as virgin polyester thread and is certified Standard 100 by Oeko-Tex.

Chemical Recycling Plastic Waste

-U.S. EPA Weighs Regulation of Chemical Recycling

The U.S. Environmental Protection Agency is considering regulating chemical recycling, a controversial technology that aims to convert mixed plastic waste into fuel or energy.

In its notice in the Federal Register earlier this month, the EPA said it wants more information about so-called pyrolysis and gasification, also known as advanced or chemical recycling, and is considering how they could be regulated under the federal Clean Air Act.

“The Agency believes that there is considerable confusion in the regulated community regarding the applicability of Clean Air Act section 129 to pyrolysis and gasification units,” the Federal Register notice said. Chemical Recycling Plastic Waste

Advanced recycling facilities aim to convert hard-to-recycle plastics, solid waste, biomass, tires and other forms of waste into fuels or energy using high heat and solvents, and has been promoted by the petrochemical and plastics industries as a way to deal with plastic waste.

A Reuters investigation earlier this year, however, found many of these facilities are not processing much waste. Reuters examined 30 projects by two-dozen advanced recycling companies across three continents and found that most still operate on a small scale or have closed down, and more than half are years behind schedule on previously announced commercial plans.

The American Chemistry Council has urged U.S. lawmakers to pass legislation that would incentivize advanced recycling, and 14 U.S. states have passed advanced recycling laws that would exempt chemical recycling facilities from solid waste and recycling laws.

Chemical Recycling Plastic Waste

-Bottlenecks hinder September economic growth in eurozone

Supply bottlenecks have slowed the rate of economic growth in the eurozone, impacting both manufacturing and services sectors in September, following a 15-year high in July.

The latest flash data of the Purchasing Managers’ Index (PMI) released by IHS Markit on Thursday, indicated that while considerably above contraction, the combined metric for the sectors hit a five-month low.  Chemical Recycling Plastic Waste

This trend was echoed in the UK, with growth hitting its weakest point in seven months, although the decline was less pronounced than in the eurozone, and shaped by the same driver of supply constraints.

Business expectations for the coming year also eroded on concerns of increased coronavirus infection rates with the spread of the Delta variant which could continue to shape market fundamentals.

Company costs rose at the fastest rate in 21 years as demand continued to outstrip supply, with prices being passed through from the manufacturing to the services sector.

Frequently increased costs were passed down to customers, with inflationary pressures rising to the third-highest rate in 20 years in September, only surpassed by June and July levels.

Chemical Recycling Plastic Waste

-Arburg successfully tests Inzea PLA

The product family can be used in a wide range of applications and suitable for food contact in accordance with Regulation (EU) 10/2011, particularly in the household segment, catering, packaging and agriculture

At its Customer Center in Lossburg, Germany, ARBURG regularly carries out processing tests on bio-based plastics, including the INZEA product family distributed by Biesterfeld. The injection moulding machine manufacturer found that the compostable PLA biopolymer compound can be used to produce high-quality parts with high process reliability and without the need for additional machine equipment. This makes INZEA an excellent alternative to fossil-based materials.

INZEA is a bio-based and fully biodegradable and compostable polymer in accordance with EN 13432. The product family is based on polylactic acid from renewable and non-genetically modified sources, which does not compete with the food chain. Some types also contain a proportion of starch. INZEA is suitable for injection moulding, extrusion and thermoforming.  Chemical Recycling Plastic Waste

The product family can be used in a wide range of applications. It is suitable for food contact in accordance with Regulation (EU) 10/2011, particularly in the household segment, catering, packaging and agriculture. Typical applications for INZEA® include plastic bags, coffee capsules, bottles and boxes.

Arburg successfully tests Inzea PLA

-NexKemia intends to increase prices for PSV-S in October

Nexkemia intends to increase its expandable polystyrene (PSV-S) prices in North America by 8 cents per pound (USD176 per tonne) in October, according to the company’s letter to customers.

Nexkemia did not raise PSV-S prices in September. The company attributed the rise in prices for PSV-S to the rise in prices for benzene in North America, as well as for other raw materials.  Chemical Recycling Plastic Waste

Hurricane Ida shut down 38% of North American styrene production at the end of August. Two styrene plants in Louisiana have already been restarted but are not yet fully operational. One plant in Texas has also been shut down for scheduled repairs. Spot prices for styrene rose 8 cents a pound amid reports of blackouts.

Two other producers also raised prices for PSV-S for October.

Earlier it was reported that Nexkemia cut prices of expandable polystyrene (PSV-S) in North America by 7 cents / lb (USD154 / t) in August . EPSilyte also posted a 5 cents / pound increase from August 1 in August.

NexKemia intends to increase prices for PSV-S in October

-Borealis cuts ammonia production on high prices of natural gas

Borealis is to cut ammonia production due to the high prices of natural gas, a spokesperson at the Austrian major confirmed to ICIS on Thursday.

The company, which produces ammonia at several European facilities, would not disclose whether ammonia output will be cut across the board or just at some facilities.

The move by Borealis comes after other large European fertilizer producers cut ammonia production on the back of high prices for natural gas globally.

Last week, Norway’s major Yara and its peer OCI of the Netherlands announced output cuts; this week, Ukraine’s OPZ followed suit.

Short supply and high demand ahead of the winter season have caused natural gas prices to shoot up to record highs. Chemical Recycling Plastic Waste

Borealis, a subsidiary of Austria’s energy major OMV, makes around 20% of its sales from fertilizers; ammonia is one of them.

Borealis cuts ammonia production on high prices of natural gas

Chemical Recycling Plastic Waste

Film recycling Thermoplastic Market 24-09-2021