Synvina extends PEF pilot phase – Amsterdam-based Synvina CV is planning to extend the pilot phase of its FDCA (furandicarboxylic acid) production by 24 to 36 months in order to “optimise” future commercial-scale production – Synvina PEF pilot phase - Arhive

This content has been archived. It may no longer be relevant
Synvina PEF pilot phase Synvina PEF pilot phase  Synvina PEF pilot phase  Synvina PEF pilot phase  Synvina PEF pilot phase  Synvina PEF pilot phase  Synvina PEF pilot phase  Synvina PEF pilot phase  

Synvina extends PEF pilot phase

Synvina PEF pilot phase

Photo by Avantium NVpilot phase extended to optimise future commercial-scale production.

Amsterdam-based Synvina CV is planning to extend the pilot phase of its FDCA (furandicarboxylic acid) production by 24 to 36 months in order to “optimise” future commercial-scale production, according to Avantium NV, one of the partner companies in the joint venture.

In a 12 Jan statement, Avantium, who shares the ownership of the bio-plastics start-up with BASF SE, said the decision was made following a broad feasibility assessment for commercial-scale production of FDCA in its reference plant intended to be built in Antwerp.

FDCA is the main building block for the new polymer PEF (polyethylenefuroate).

The assessment, according to Avantium, looked at product performance, market appetite and technical process, and confirmed that product performance and customer demand were “strong”.

In the technical process evaluation, however, Synvina has identified some steps that require improvement, which will help efficiency of the process.

“As a result, Synvina intends to extend the pilot phase, which will in turn extend the timeline to start up the reference plant by 24 to 36 months,” said Avantium.

“The confidence of Avantium, BASF and Synvina in the product performance and its market potential has only increased since Synvina was founded.

“Encountering technical challenges is not uncommon in innovative, ground-breaking technologies of this kind,” said Avantium CEO Tom van Aken, adding the companies involved had increased confidence in the product performance and market potential.

“Synvina is working closely with BASF and Avantium to resolve these challenges. We are all confident that this will result in a production process that runs smoothly and reliably, and a product that is as pure as the market demands,” he added.

According to Van Aken, the reference plant will be operational in the 2023-2024 time-frame.

Synvina was established in October 2016 with the intent to build and operate the reference plant.

This will be the first commercial-scale plant to produce FDCA, the breakthrough building block for the biopolyester PEF.

Related Topics

 What’s new in bioplastics? – 12th annual European Bioplastics conference discusses food brand owners’ use of bioplastics, biodegradable solutions for multilayer food packaging, and production of new polymer PEF – European Bioplastics conference EUBP