Brown University Researchers Develop Technology to Minimize Polymer Degradation - Arhive
Brown University Researchers Develop Technology to Minimize Polymer Degradation
Author : SpecialChem
Baker treated PLA samples under a variety of different temperature and pressure conditions for varying amounts of time. Pressures ranged from 2,000 to 20,000 pounds per square inch. Temperatures used for treatments were above, below and nearly equal to the glass transition temperature for PLA — the temperature at which the amorphous parts of the material transition from solid to rubbery.
Baker showed that the treatments increased the amount of crystalline area in the material, but there was another more surprising finding. At higher temperatures and pressures, the amorphous parts of the material became birefringent, meaning that they bend light differently depending upon how the light is polarized. That is an indicator of a substantial structural change in the amorphous portions of the material.
Generally speaking, birefringence is a property found in crystalline materials, so seeing it in the amorphous regions of PLA was a surprise. “We didn’t expect it to have such properties,” Mathiowitz said. “So to see it in the amorphous phase was really amazing.”
Baker then used several methods to further characterize how the amorphous regions had changed. Using a technique called X-ray diffraction, he showed that polymer strands in some of the amorphous sections had become dramatically more ordered.
“The polymer strands are normally a tangled mess,” Baker said. “But we found when we processed the material that the amorphous region became less entangled and much more oriented in a particular direction.”
Further thermal analysis showed that the more ordered sections had a higher glass transition temperature. In general, amorphous materials with higher glass transition temperatures degrade at significantly slower rates.
The new amorphous phase combined with the overall increase in crystallinity in the treated samples could have significant implications for the material’s mechanical properties, the researchers said. The higher crystallinity could make it stronger, while the more ordered amorphous sections could make it last longer. That slower rate of degradation could be particularly useful in medical applications, an area in which Mathiowitz’s lab specializes.
For example, PLA is used as a coating for time-release pills and implantable drug delivery systems. If the rate at which PLA degrades can be controlled, the rate at which it delivers a drug can be altered. There is also interest in using PLA for plates and screws used to stabilize broken bones. The advantage to PLA implants is that they degrade over time, so a patient would not need a second surgery to remove them. PLA may degrade too quickly for some of these applications, but if this new polymer phase slows degradation, it may become a better option.
“Now that we’ve shown that we can intentionally induce this phase, we think it could be very useful in many different ways,” Mathiowitz said.
The researchers plan more research aimed at quantifying changes in material properties as well as investigating whether this phase can be induced in other semi-crystalline materials.
About Brown University
From the beginning, Brown’s mission has been to foster academic freedom and excellence—a rich story that runs through this interactive timeline of the University’s history.
Founded in 1764 on the idea of admitting students regardless of religious affiliation, Brown is the seventh-oldest college in the United States.
For more than 250 years, Brown has mirrored and spurred the wider culture, with many prominent names—among them Horace Mann, John D. Rockefeller, Jr., Janet Yellen, and Edwidge Danticat.
Source: Brown University